The SMOK Scar-P3 Pod Mod Kit is one of the latest pod mod that made for both DTL and MTL vaping. It is a very attractive, comfortable, and well-built kit with a 2000mAh battery and 80W maximum power output. The SMOK Scar-P3 pod holds 2ml of e-liquid and comes with RPM coils for DTL and MTL vaping. Thanks Newvaping for giving me this device for review.
Dimensions: 110mm x 32.3mm x 27mm
Wattage output: 80W
Pod capacity: 5.5ml(standard) / 2ml(TPD)
Coil resistance: 0.16ohm, 0.4ohm
1 x SCAR-P3 Pod Mod
1 x 0.4ohm RPM Mesh Coil
1 x 0.16ohm RPM 2 Coil
1 x SCAR-P3 RPM Pod
1 x SCAR-P3 RPM 2 Pod
1 x USB Type-C Cable
1 x User Manual
The SMOK Scar-P3 Pod Mod Kit stands at approximately 110mm x 32.3mm x 27mm, which is a little smaller than SMOK Scar-P5 Pod Mod Kit. It is waterproof, dustproof and shockproof. The portable design fits the palm nicely and is comfortable to hold. The chassis is made of leather and zinc alloy that provides durability. The overall build quality is well and the machining is top-notch.
The front side is well laid. The Fire Key and UP/Down buttons are responsive and easy to click. The colourful 0.96-inch screen is clear and bright, which has all the information you need like battery life, wattage, voltage and resistance.
The SMOK Scar-P3 Pod Mod Kit is a lightweight device with only 100g body. With 2000mAh battery, there is a maximum wattage of 80W. It has waterproof, dustproof and shockproof function to give you a great vaping experience. The screen is 0.96-inch. The SMOK Scar-P3 Pod Mod Kit can detect the installed coil type for better function. You can press the fire button to take a draw. The operation of SMOK Scar-P3 Pod Mod Kit is pretty simple and straightforward.
With the pod upside down, remove the filling plug and fill with your e-liquid
Firmly and gently close the filling plug
Place the pod back to the mod
Wait at least 5min to make the coil fully soaked into the e-liquid to prevent dry hits
The pod of SMOK Scar-P3 Pod Mod Kit is held in place firmly without wiggle. The SMOK Scar-P3 pod holds 2ml of e-liquid with a side filling design. The filling port is easy to fill and covered by a rubber plug. The pod window is clear. You can easily see the juice level.
The kit comes with 2 RPM coils -0.16ohm RPM 2 Coil and 0.4ohm RPM Mesh Coil. To get started, you should prime your coil with a few drops of e-liquid onto the wick. Then insert it into the SMOK Scar-P3 Pod. Remove the rubber plug and fill your favorite juice. Leave it at least 5min to get the coil fully saturated.
The SMOK Scar-P3 Pod Mod Kit is a very attractive, comfortable, and well-built device. It supports DTL or MTL vaping. The flavor and vapor production are excellent. If you are looking for a daily device, I will highly recommend you to use the SMOK Scar-P3 Pod Mod Kit. What are your thoughts on the SMOK Scar-P3 Pod Mod Kit? Let me know by leaving a comment!
Good build quality
Lightweight and portable
Compatible with RPM coils
Supports DTL or MTL vaping
Ergonomic leather handle design
Waterproof, shockproof, dustproof
Dual-channel direct airflow design
Superb flavor and huge vapor production
Check it at Newvaping.com, a UK based store that ships to Europe.